News
News Categories

CES 2017: ASUS unveils their new Z270 series motherboards

By John Law - on 4 Jan 2017, 1:02am

CES 2017: ASUS unveils their new Z270 series motherboards

ASUS announced their new range of Z270 series motherboards for CES 2017 today. The new motherboards are designed to work with Intel’s new Kabylake CPUs, which are also purported to be unveiled during their keynote at the tech trade show in Las Vegas, Nevada.

ASUS’ new motherboard features a whole spectrum of models, from their fan-favorite Republic of Gamers (ROG) motherboards, all the way down to their brand new Prime motherboard lineup.

ROG Maximus IX and Strix Series

First up in line is the company’s new and improved ROG Maximus IX and Strix motherboards. As before, the Maximus IX series is comprised of:

  • Maximus IX Extreme (E-ATX)
  • Maximus IX Formula (ATX)
  • Maximus IX Code (ATX)
  • Maximus IX Hero (ATX)
  • Maximus IX Gene (M-ATX)
  • Maximus IX Impact (Mini ITX)

Of these listed motherboards, ASUS’ focus was on their new and improved Maximus IX Formula, and their brand new Maximus IX Code and Hero motherboards.

The ASUS ROG Maximus IX Formula.

As mentioned, the Maximus IX Formula is an updated version of the previous generation of the company’s ROG Maximus series. Updated with new features such as ASUS’ RGB LEDs and Aura Sync lighting, the Maximus IX Formula is a high-end motherboard that’s designed for high-end performance, gaming, and custom liquid-cooling solutions.

The motherboard itself has built-in CrossChill EK II VRM blocks that allow custom case modders to extend their liquid-cooling customization directly into the motherboard as well.

the Maximus IX Formula has a pre-mounted I/O shield.

Other features on the Maximus IX Formula include a pre-mounted I/O shield that ASUS says is 2.5 times more resilient than the industry standard I/O shield, and is far less likely to suffer from a static discharge. Also, the motherboard is fitted with a backplate to add more rigidity and to protect it from bending.

The image below lists down the full details of the Maximus IX Formula.

You can click the image for a larger version of it.

Next on the list is the Maximus IX Code, ASUS’ latest addition to the Maximus motherboard lineup.

The Maximus IX Code.

Designed to be stylish and made to perform, the Maximus IX Code is an ATX motherboard that’s covered with ASUS’ ROG Armor. The armor serves a dual purpose, the primary purpose being to make the motherboard look good, and its secondary purpose to protect the component from dust build up.

Like the Maximus IX Formula, the power and reset button at the top right of the motherboard is also enveloped by the ROG Armor, providing users with a satisfying click whenever it’s pressed.

Unlike the Maximus IX Formula, the Maximus IX Code does not have a EK block built on to its VRAM modules. Instead, ASUS uses an aluminum chassis that envelops both the front and the back of the motherboard, allowing the metal to act as a heatsink.

The image below is the full specifications of the Maximus IX Code motherboard, alongside a summarized component list for both the Formula and Code.

Click the image for a bigger version of it.

Last, but not least, on this list is the Maximus IX Hero. What makes this ATX motherboard different than the rest of the other motherboards is the ability for custom PC makers to attached their own 3D-printed labels on the motherboard via specially provided ports that are locate on the motherboard.

Like the Maximus IX Formula and Code, the Maximus IX Hero comes with a plethora ports and features, such as multi-GPU support for NVIDIA’s SLI and AMD’s Radeon CrossFireX, as well as ASUS’ SupremeFX DAC and the built-in Sonic Studio III & Sonic Radar III sound card.

On that note, the new Sonic Studio III sound card that is built into the Maximus IX motherboards now allow users to map out their audio streams to different output, allowing users to compartmentalize their audio choices without any fuss.

Naturally, these motherboards are also Intel Optane memory ready, making them some of the first few motherboards that will be compatible with Intel’s 3D Xpoint memory. The new motherboards comes with a USB 3.1 front panel connector that runs on a specially designed ASM 2142 USB 3.1 controller that ASUS says allows transfer speeds to be 12.7 percent faster than Intel’s own USB 3.1 controller.

You can click the image for a bigger version of it.

ASUS’s ROG Strix series motherboards also follow a similar structure as the Maximus IX motherboard lineup, the only difference being the general design of the motherboards' heatsinks.

The new ASUS ROG Strix Z270 series of motherboard essentially follow the same naming convention as the ROG Maximus IX series motherboards.

TUF Series

ASUS' TUF series motherboard has returned. Seen here is the TUF Z270 Mark I.

One lineup that we were very surprise to see making a comeback is ASUS’ TUF series motherboards. Short for The Ultimate Force, this lineup was actually the first of all ASUS’ motherboard lineup to feature the whole 'Armor' look and design across the board.

The new Z270 TUF series, of course, has been updated since then. For starters, they now have support for DDR4 memory with frequencies of up to 3,866MHz. They also have the ASUS PRO Clock technology, granting users a more stable voltage control, ultimately granting users the ability to overclock Intel’s new Kabylake CPUs even harder than most other motherboards on the market.

Users can also view their GPU temperature in real-time now, thanks to the built-in Thermal Radar+ function and feature. This means that users won’t have to download third-party software like GPU-Z in order to view the temperature of their graphics card.

The TUF motherboards are also engineered to work with workstations graphics cards if so chosen by the users. ASUS has guaranteed that their motherboards will work with any workstation graphics cards that is on their Qualified Vendor List (QVL), so there’s very little worry there.

Last but not least, all motherboards under the TUF series are fitted with ASUS’ Aura Sync lighting.

The Z270 TUF series will be available in two variants: Mark I and Mark II. Below are the specifications for both motherboards.

You can click the image for a larger version of it.

Prime Series

The ASUS Prime Z270 series motherboards are designed for the mainstream consumer segment.

If you’re just looking for a standard performing motherboard with a minimal desire of overclocking your CPU beyond what is technologically possible, then ASUS’ Prime series motherboards are for you. are practically motherboards that are designed for the mainstream consumer segment of ASUS’ motherboard market.

ASUS’ Z270 Prime series can be split into two variants: the Z270A and the Z270AR. While the Prime series is not for overclockers in general, the series is by no means lacking in features. The motheboards under these series are able to support DDR4 memory with clockspeed as high as 3,866MHz, and on top of that, they’re also Intel Optane Memory Ready.

Adding on to those features is the support for dual M.2 SATA SSDs with data-transfer speeds of up to 32GB/s, and can even do so in a PCIe RAID format.

The motherboards are also fitted with ASUS’ Crystal Sound 3 built-in audio card, and also has support for dts Headphone-X, giving users yet another level of audio immersion.

The list of motherboards that will be available under the ASUS Prime Z270 range of motherboards. You can click the image for a larger version of it.

As an extra added bonus, the PCIe slots of all Z270 Prime motherboards have been fortified with Solid Soldering, so that they don’t get damaged over long periods of time with heavy high-end graphics cards that are fitted with massive heatsinks and cooling fans.

For more from ASUS, follow us here.