Product Listing

Samsung SSD 850 EVO: Big reputation to live up to

By Ian Chee & Kenny Yeo - 16 Jan 2015

Introduction

The next step for 3D V-NAND

2014 was an interesting year for SSDs. Adoption of SSDs has continue to rise thanks to falling prices; we also saw some players exit the market due to intensifying competition; and Samsung became the first to commercialize 3D V-NAND.

The SSD 850 EVO is Samsung's mainstream 3D V-NAND SSD and stores 3 bits of data per cell.

3D V-NAND is kind of a big deal as it addresses the shortcomings of current NAND lithography. To put it very briefly, 3D V-NAND stacks memory cells on top of each other in order to overcome the problem of squeezing cells closer and closer together. It’s an elegant and advantageous solution. Not only does this mean more cells can now be squeezed into a fixed area, stacking cells also improves performance, endurance and power efficiency. As a result, not only was the SSD 850 Pro the fastest drive we have ever tested, it was also one of the few drives to offer a whopping 10-year long warranty.

To say that the SSD 850 PRO was a great success would not be an overstatement, but the SSD 850 PRO was clearly a drive designed and priced for enthusiasts, and Samsung is keen to expand is 3D V-NAND offerings to other segments of the market, hence the SSD 850 EVO that we see here. Don’t be fooled into thinking that the SSD 850 EVO is just a watered down version of the SSD 850 PRO. This drive actually uses a lot of new components, which we will go into detail now.

To begin, while the early SSD 850 PRO used 32-layer 3D MLC V-NAND, the new SSD 850 EVO uses Samsung’s newest 32-layer 3D TLC V-NAND. To be put it briefly, TLC NAND increases memory density but at the cost of performance and endurance. However, given the benefits of the 3D architecture of 3D V-NAND, it is possible that the disadvantages of TLC NAND could be nullified, resulting in a faster mainstream SSD.

On top we have the older SSD 840 EVO and below lies the newer SSD 850 EVO. Samsung seems to have swap color schemes for the drives.

And thanks to this new 32-layer TLC 3D V-NAND, Samsung is also able to build higher capacity drives. And although we heard that a 2TB drive is actually possible, 1TB is unfortunately still the maximum that Samsung offers right now as Samsung believes that a 2TB drive would be priced much too high to be attractive to users.

Diving deeper, the density of this new TLC 3D V-NAND is 128Gbit, comparable to the latest MLC NAND from competitors such as Micron and also Samsung's old 19nm TLC NAND used in the SSD 840 EVO. In case you are wondering, the MLC 3D V-NAND used in the SSD 850 PRO has a memory density of 86Gbit. And because this new TLC 3D V-NAND is manufactured on a 40nm process node, Samsung has been able to increase the endurance of its new drive by a factor of about two. Typically speaking, TLC NAND drives enjoy roughly 1000 or so P/E cycles (program-erase), whereas Samsung's new TLC 3D V-NAND brings that figure to around 2000, which is comparable to most MLC NAND drives.

The Samsung SSD 850 EVO also has a new controller, dubbed simply as the MGX. This is a lower power dual-core controller that is used in the 120GB, 250GB and 500GB variants of the SSD 850 EVO. The 1TB variant employs the MEX controller, the same used in the SSD 850 Pro. The interface is still SATA 6Gbps, though it surely won't be long before we start seeing PCIe and M.2. variants of these drives.

Similar to the old SSD 840 EVO, the SSD 850 EVO also features TurboWrite and RAPID mode technologies. TurboWrite dedicates a small portion of its TLC NAND to work as an SLC write buffer, which is similar to SanDisk’s nCache technology. This helps boost its write performance to make up for the shortcoming of TLC NAND, which typically suffers from inferior write performance. RAPID mode, on the other hand, is a caching technology that was introduced in the middle of last year to boost random I/O performance with smaller size data at low queue depths. Essentially, it makes use of unallocated system memory and spare CPU cycles to cache data and boost performance. We investigated Samsung's RAPID mode technology and found it to work very well.

Samsung's Magician utility is easy to use and helps monitor the status and health of your drive.

Finally, like all Samsung SSDs, the SSD 850 EVO can be managed using Samsung's excellent Magician utility. The utility lets you check your drive's health status, update firmware, security settings and also enable or disable RAPID mode.

 

Test Setup

The Samsung SSD 850 EVO will be tested on our dedicated storage testbed:

  • Intel Core i5-2500K (3.3GHz)
  • ASUS P8Z77 Pro Thunderbolt (Intel Z77 chipset)
  • 2 x 2GB DDR3-1600 memory
  • MSI GeForce 8600 GTS
  • Windows 7

Our revised benchmark ditches older benchmarks such as HD Tune and also includes an all new timing test to better evaluate the drive’s real world performance. The list of benchmarks used are as follows:

  • AS-SSD benchmark 1.7.4739
  • CrystalDiskMark 3.0.1
  • PCMark 7 (Storage suite)
  • Iometer (version 2006.07.27)
  • Timing Tests (Cold start, Reboot, Apps Launching)

It will be interesting to see how the new SSD 850 EVO matches up against its predecessor, the SSD 840 EVO, and also Samsung’s flagship SSD 850 PRO. We also included results from comparable mainstream drives such as the Crucial MX100 and the Crucial M550.

Here is the list of drives tested:

  • Samsung SSD 850 EVO
  • Samsung SSD 840 EVO
  • Samsung SSD 850 PRO
  • Samsung SSD 840 PRO
  • Crucial MX100
  • Crucial M550
  • Plextor M6 Pro
8.0
  • Performance 8
  • Features 8.5
  • Value 7.5
The Good
Improved performance
TurboWrite cache technology
RAPID mode greatly boosts performance
Samsung Magician utility
Longer 5-year warranty
The Bad
No accessories
Higher price
Write performance suffers with increasing queue depth